Announcement

Collapse
No announcement yet.

Lg 50pq3000

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lg 50pq3000

    Just been given a lg 50pq3000 plasma with a typical plasma fault where the tv just continuously clicks I have checked the boards for any obvious faults but failed to find any when I plug the tv in the red light comes on for a second then just keeps clicking are there any known faults with this set? No light from the screen etc

    #2
    Re: Lg 50pq3000

    I've unplugged the ysus and still the same and the same with zsus and the same again with the main board so this has pointed to the power supply board i will get pictures and voltages and post them later

    Comment


      #3
      Re: Lg 50pq3000

      Psu switching Ic for lower rails forgot PN, just change Psu if you dont know what your doing.
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment


        #4
        Re: Lg 50pq3000

        Originally posted by ReeceyBurger123 View Post
        Psu switching Ic for lower rails forgot PN, just change Psu if you dont know what your doing.
        Where's the fun in just replacing i would like to try repair as new power supply is £100

        Comment


          #5
          Re: Lg 50pq3000

          Check diode D352 on the power supply board it may be short circuit.
          i had this fault once before on this model.

          Comment

          Working...
          X