Hi Guys any help on this will be much appreciated.
I have a HP 310-1145uk aio running windows 7.motherboard no. DAN0NZ2MB6E0 .
Problems I have is-
The power switch flashes 3 times when you try to turn it on- No fans spin completely dead apart from power switch light.
Things I have tried-
1. the power brick was dead so I have tried a known good psu and get the above symptoms.
2. Have disconnected the motherboard from all parts just the cpu fitted.no ram etc and I still get the same results
3. have disconnected everything including the cpu and still get the 3 flashes on power light.
4. Have reset cmos jumper and tried just the cpu and one stick of ram and still get the 3 flashing light.
Could the old psu have fried something on the motherboard? .I have removed The motherboard and cant see any signs of obvious damaged on it.
Any help would be great
Thanks guys
I have a HP 310-1145uk aio running windows 7.motherboard no. DAN0NZ2MB6E0 .
Problems I have is-
The power switch flashes 3 times when you try to turn it on- No fans spin completely dead apart from power switch light.
Things I have tried-
1. the power brick was dead so I have tried a known good psu and get the above symptoms.
2. Have disconnected the motherboard from all parts just the cpu fitted.no ram etc and I still get the same results
3. have disconnected everything including the cpu and still get the 3 flashes on power light.
4. Have reset cmos jumper and tried just the cpu and one stick of ram and still get the 3 flashing light.
Could the old psu have fried something on the motherboard? .I have removed The motherboard and cant see any signs of obvious damaged on it.
Any help would be great
Thanks guys
Comment