Hi folks,
I just ordered new capacitors to recap my viewsonic vx2835 (which has the same power board as the Hanns G HG28) and i was able to mainly order Panasonic FC brand caps for all but a few of the capacitors. However there were some caps i just couldn't find readily available here (czech republic) or in fact europe in a board recommended brand. I would have to order from the US or buy in great bulk.
One example was the 22uF 35v and the 10uF 10v caps off of the power board.
So i went for caps made by Yageo, Vishay (low esr) and Jianghai to fill the gaps.
I haven't read much about these and wanted to know your opiniions as to whether they are any good? I also have access to Hitano caps pretty readily as well but know nothing about their reliability.
Would you guys suggest i just reorder the odd caps from the US and put the repair on hold for the sake of the longevity of the monitor?
Thanks again
I just ordered new capacitors to recap my viewsonic vx2835 (which has the same power board as the Hanns G HG28) and i was able to mainly order Panasonic FC brand caps for all but a few of the capacitors. However there were some caps i just couldn't find readily available here (czech republic) or in fact europe in a board recommended brand. I would have to order from the US or buy in great bulk.
One example was the 22uF 35v and the 10uF 10v caps off of the power board.
So i went for caps made by Yageo, Vishay (low esr) and Jianghai to fill the gaps.
I haven't read much about these and wanted to know your opiniions as to whether they are any good? I also have access to Hitano caps pretty readily as well but know nothing about their reliability.
Would you guys suggest i just reorder the odd caps from the US and put the repair on hold for the sake of the longevity of the monitor?
Thanks again
Comment