Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Aspire One LA-5141P

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Aspire One LA-5141P

    I have Aspire one in which 3VALW, 5VALW are missing. Also no voltage at PU4 & PU5.
    19v reaches to PQ10 & lost at PJ11. I couldn't find PR56 as there is no marking for caps & resistor.

    Schematic attached.
    Attached Files

    #2
    Re: Aspire One LA-5141P

    have u 19v on 5-8 pin on pq10?

    Comment


      #3
      Re: Aspire One LA-5141P

      pr56 is wide resistor with lot of solder on it like jumper

      Comment


        #4
        Re: Aspire One LA-5141P

        Originally posted by ktmmotocross View Post
        pr56 is wide resistor with lot of solder on it like jumper
        I found PR56 & it is blown off becoz other pad is grounded.
        I checked Caps, PQ11 & PQ13 which seems to be ok.

        Found PQ25 & a surrounding cap was shorted, removed it. But there is much shorting, aslo ICH seems to be shorted as it get kinda hot without pressing pwon button.

        So, i'm giving up working on this crap.
        Last edited by dspok; 07-09-2014, 06:22 AM.

        Comment


          #5
          Re: Aspire One LA-5141P

          At last desolder chip, clean the board and check for shorts.


          Have many boards waiting for working chip.

          Comment

          Working...
          X