Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

MSI MS-7592 Stuck on 'initializing usb controllers'

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    MSI MS-7592 Stuck on 'initializing usb controllers'

    Hi guys,

    Got this one from the bin, G41TM-P33 VER 1.1

    it boots but stucks on the initializing usb controllers during post.

    nothing is connected beside ps2 keyboard

    tried diffrent ram and cpu and cmos reset, no shorted pins,

    no luck.

    the lan controller is prerry hot reached 45c after 15 secs.

    could it be that it's bad?

    i can try to take it out with hot air...
    Tags: None
    #2
    Re: MSI MS-7592 Stuck on 'initializing usb controllers'

    could also be bad cap(s) that filter the usb power.

    Comment

      #3
      Re: MSI MS-7592 Stuck on 'initializing usb controllers'

      Originally posted by s_henya View Post
      the lan controller is prerry hot reached 45c after 15 secs.

      could it be that it's bad?
      Yes, that could well be the problem. I've never experienced this myself, but I have read here on BCN other people's threads, who had problem with their motherboards not boot due to faulty LAN chip.

      That said, always make sure you have tried the simple stuff first. That is:
      - running the system with only necessary components (CPU, RAM). Everything else disconnected
      - power supply is good and has no bad caps
      - motherboard is properly seated in case and not shorting on anything
      - your test hardware and peripherals are all good

      If you have verified all of that, then I guess go ahead and remove the chip if it won't be too much trouble for you. Let us know what results you get.

      Comment

        #4
        Re: MSI MS-7592 Stuck on 'initializing usb controllers'

        I think its not a a lan chip its rtm875t-605,
        im not sure what is it...

        could it be a bad bios?

        Comment

          #5
          Re: MSI MS-7592 Stuck on 'initializing usb controllers'

          Originally posted by s_henya View Post
          I think its not a a lan chip its rtm875t-605,
          im not sure what is it...
          Looks like the RTC IC for your motherboard (RTC = Real Time Clock... i.e what controls the FSB, PCI, and CPU clock). At least that's what I get when I read this:
          http://forum.notebookreview.com/thre...-ocing.429717/
          and another datasheet I saw online (can't seem to past the proper link here for some reason, though).

          Do you see a cristal near the IC (typically, they are in a shiny metallic case)? 14 MHz written on top of it (or 14.xxxx)?

          Originally posted by s_henya View Post
          could it be a bad bios?
          No.
          Bad BIOS won't cause an IC on the board to overheat.

          Comment

          Previous template Next
          Working...
          X