Hi, i have problem with 17" HP L1706, i have done recap. Monitor turn on and "check signal" logo is OK, but when i plug in the RGB cable the picture is too lighten and color are not good. I have try to factory reset, change cable, check cable between board and LCD. The problem is grey is light blue and things like that. I use exact value when recaping.
-
...the quieter you become the more you are able to hear... -
Re: Hp l1706
Here i schematics....the quieter you become the more you are able to hear... -
Re: Hp l1706
I noticed that whine is like light blue. rest of color is OK....the quieter you become the more you are able to hear...Comment
-
Re: Hp l1706
Does it have the same problem if uses with another PC?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Hp l1706
yes, i connect cable...the quieter you become the more you are able to hear...Comment
Comment