Samsung syncmaster t220 Powers on no screen.

[eniac22]

Re: Samsung syncmaster t220 Powers on no screen.

I have also problem with this monitor, backlight is working for 1 sec and then black screen, i check the capacitors with a esr meter and seams to be good.

- I've checked the voltages at the connector:

1 -> 0.11V (BL_ADJ_PWM)
2 -> 15.38V
3 -> 0V (GND)
4 -> 0V (GND)
5 -> 5.20V (5V_IP_1)
6 -> 5.20V (5V_IP_2)
7 -> 0.54V (BL_ADJ_ANALOG)
8 -> 2.56V (BL_EN)
9 -> 3.25V
10 -> 2.97V (LED)
11 -> 3V (KEY1_OUT)
12 -> 1.78V (KEY2_OUT)

any help?

Ok i found that 2 of 4 CCFL lambs is dead, i try lambs from other screen and is working ok

[budm]

Re: Samsung syncmaster t220 Powers on no screen.

If you look at the thread, you will see that your pins:
1 -> 0.11V (BL_ADJ_PWM)
7 -> 0.54V (BL_ADJ_ANALOG)
What do you get on those two pins now?