What are you guys using for a ventilation system when you are desoldering and soldering?
-
-
Re: Ventilation System
A small 80mm pc fan at medium speed (about 9v) blowing air sideways on the desk and an open window. -
Re: Ventilation System
My lungs...
Or I open the window and/or use a desk fan.Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Ventilation System
Usually just an open window a few feet from my workbench. It's the best I can do in my basement at the moment. Luckily I don't do extensive soldering, so that one window is sufficient. If I ended up soldering things more frequently, I'd set up a window fan with aluminum dryer ducting to extract the smoke and fumes. It's cheap, but it'll do the trick!Comment
-
Re: Ventilation System
I made this from Bath room fan and Charcoal filter.
http://s807.photobucket.com/albums/y...t=DSCF0519.jpgNever stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Ventilation System
I don't have any ventilation system yet, I just blow away the smoke if it floats towards my face.Muh-soggy-kneeComment
-
Re: Ventilation System
I don't mind spending up to $300 for a fume extractor ventilation system. Can someone recommend one?Comment
Comment