Hi all,
i have that MBX-216 MOTHERBOARD completely dead.
I've seen that from PU2 ic there are 5v but 3v are missing pag.23 of schematic
On PQ8 pin 5:19v 1,2,3:0v 4:0v
RVCC ON pin 27 U2 is 0volt. if i put an external voltage on pin 27 of U2 3volt of PQ8 are present, then i suppose RVCC ON is missing.
Is RVCC ON generated from pin 11 of U18 ?
I have replaced it but still 3 volt are missing.
Any help please...
Tks
i have that MBX-216 MOTHERBOARD completely dead.
I've seen that from PU2 ic there are 5v but 3v are missing pag.23 of schematic
On PQ8 pin 5:19v 1,2,3:0v 4:0v
RVCC ON pin 27 U2 is 0volt. if i put an external voltage on pin 27 of U2 3volt of PQ8 are present, then i suppose RVCC ON is missing.
Is RVCC ON generated from pin 11 of U18 ?
I have replaced it but still 3 volt are missing.
Any help please...
Tks
Comment