I have a Powermate 9120 UPS. After replacing the batteries, it came up
with "DC bus fault"
My first guess was that the batteries were not connected properly,
or maybe a relay had burnt out.
Then I found in a Finnish forum that this fault was cured by replacing
two capacitors. The poster further claimed that this was a frequent
failure in these models.
Has anybody fixed this brand of UPS and found bad caps are the culprit?
with "DC bus fault"
My first guess was that the batteries were not connected properly,
or maybe a relay had burnt out.
Then I found in a Finnish forum that this fault was cured by replacing
two capacitors. The poster further claimed that this was a frequent
failure in these models.
Has anybody fixed this brand of UPS and found bad caps are the culprit?
Comment