Announcement

Collapse
No announcement yet.

GL10FG schematics needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GL10FG schematics needed

    It's toshiba P875... this unit got a shorted at VREG5 line..

    Thanks..

    #2
    Re: GL10FG schematics needed

    see here

    https://www.elvikom.pl/post95270.htm...=GL10FG#p95270
    Im Back... sort of...

    Comment


      #3
      Re: GL10FG schematics needed

      INVENTEC GL10FG 6050A2492401 A02 REV X01 - Toshiba Satellite P875
      http://**************/load/noutbuki/platforma_inventec/inventec_gl10fg_6050a2492401_a02_rev_x01_toshiba_satellite_p875/310-1-0-29447

      Comment


        #4
        Re: GL10FG schematics needed

        Could you upload the file here?

        Thanks..

        Comment


          #5
          Re: GL10FG schematics needed

          Давай модель платы,загружу сюда,у меня доступ и на ELVICOM и на Remont-aud есть

          Comment


            #6
            Re: GL10FG schematics needed

            6050axxxxx
            и что там на твоей плате дальше?

            Comment


              #7
              Re: GL10FG schematics needed

              В общем вот...
              Attached Files

              Comment


                #8
                Re: GL10FG schematics needed

                Thank you very much for the schematics... but i still can't locate the cause of short circuit at vreg5 or VRP5V0A_LDO. Disconnected PAD6120 and the short circuit was not on U6100 and C6120. It's on the opposite side that cause the problem. With pad6120 disconnected i can measure now the vrp3v3a but the vrp5v0a is not. Power switch voltage is ok. Base on the schematics i can't locate D3150 and U4441 on the motherboard. the motherboard i got had an intel base system only. No normal supply at bios chip.

                Any help on this matter?

                Thanks...

                Comment


                  #9
                  Re: GL10FG schematics needed

                  Now there is a short circuit on the vreg3/5 and L6100/L6150?

                  Comment


                    #10
                    Re: GL10FG schematics needed

                    Only at vreg5 line got a short. At L6100 and L6150 were normal. Is there any other components that were connected to this line? I can only locate and test D3155 and C6120. D3150, U4441 and D390 were all not installed on this board.

                    Comment


                      #11
                      Re: GL10FG schematics needed

                      Now PAD6120 disconnect?
                      And short-circuit on vreg5 not?

                      Comment


                        #12
                        Re: GL10FG schematics needed

                        If PAD6120 is being disconnected, vreg5 gives out 5vdc... right after PAD6120 is shorted.

                        Comment


                          #13
                          Re: GL10FG schematics needed

                          Applicable laboratory power supply , and find a short circuit

                          Comment


                            #14
                            Re: GL10FG schematics needed

                            Vreg5 little of connected

                            Comment


                              #15
                              Re: GL10FG schematics needed

                              Yes. Not much of circuit connected to vreg5 line as based on the schematics...
                              I'll try replacing tps51123 if i could get the needed 5vdc with a disconnected pad6120..

                              Comment


                                #16
                                Re: GL10FG schematics needed

                                Originally posted by salawayon View Post
                                I'll try replacing tps51123
                                No sense
                                Short in load vreg5, search done using laboratory power supply

                                Comment


                                  #17
                                  Re: GL10FG schematics needed

                                  P875-s7200 gl10fg 6050a2492401-mb-a02
                                  Attached Files

                                  Comment


                                    #18
                                    Re: GL10FG schematics needed

                                    Bios
                                    Attached Files

                                    Comment


                                      #19
                                      Re: GL10FG schematics needed

                                      Originally posted by Fransleg View Post
                                      Bios
                                      Very good ✅

                                      Comment

                                      Working...
                                      X