Re: Counterfeit Samxons
I don't have (any) experience with failed Panasonic caps to judge if I should recap them or not.
If I could get a copy of FL specs, that would help the decision. I note the FJ ESR is high. For example, the 6.3v/1000uF in 8mm:
FJ = 30 ESR
GA = 14 ESR
MCZ = 18 ESR (10v)
There are 14 of these caps on the MSI board. I stock the MCZ in 10v, but could order sufficient GA if the lower ESR warrants replacement.
I don't have (any) experience with failed Panasonic caps to judge if I should recap them or not.
If I could get a copy of FL specs, that would help the decision. I note the FJ ESR is high. For example, the 6.3v/1000uF in 8mm:
FJ = 30 ESR
GA = 14 ESR
MCZ = 18 ESR (10v)
There are 14 of these caps on the MSI board. I stock the MCZ in 10v, but could order sufficient GA if the lower ESR warrants replacement.
Comment