um...dishwasher?

[Wizard]

Re: um...dishwasher?

Keep in mind bad/cracked solder joints on circcuit boards where harness plugs into.

2 years ago I think, I helped my friend fix his recent front loading cloth washer.
The controller board/box is above the drum tank, friend knew about electronics and repair but was not sure if it was joints. So I took good look and they were.
No problem since.

Cheers, Wizard

[kiddznet]

Re: um...dishwasher?

Um ....well i worried away on the Fatal1ty into the night and wee smalls
New PSU altbough the original tested fine without load..AND... mucho patience clearing and resetting the CMOS
Anyways here it is chugging away nicely

[Quasar]

Re: um...dishwasher?

I believe you've successfully hijacked your own thread...

[kiddznet]

Re: um...dishwasher?

I is not having much success with the dishwasher

[seanc]

Re: um...dishwasher?

So where are you up to with it?

[kc8adu]

Re: um...dishwasher?

somewhere there will be a list of blink codes for it.
might be easier to figure out who really built it.the name brand may be more common than the rebadge and easier to get info for.

[seanc]

Re: um...dishwasher?

From my searches, it seemed to be related to Electrolux.

[larrymoencurly]

Re: um...dishwasher?

http://www.ApplianceJunk.com <-- has some factory manuals

http://www.FixItNow.com

[kiddznet]

Re: um...dishwasher?

Thanks Larry still sifting through it.If there is any news about this animal on the net its damn well hidden

I might go hook up the pump directly to the AC and see if we got a runner there

[seanc]

Re: um...dishwasher?

Is the pump supposed to run on AC? That may be a bad idea...

Surely it gets DC from the circuit boards...

[PCBONEZ]

Re: um...dishwasher?

The pump is a big load.
Might be AC or DC - NEED TO CHECK...

[kiddznet]

Re: um...dishwasher?

Just had the manual emailed to me by a nice guy in the business
Has all the test programs and circuitry
Pushing buttons I will go!