That opinais of this device?
That looks like to you this meter of consumption for usb? Proven some Hábeis? A greeting
-
-
Re: That opinais of this device?
Input voltage: 3V-10V (precision 1%)
Voltage Resolution: 0.01V
Test current: 0.A-3.3A
Current Resolution: 0.01A (precision 0.4%)
Capacity range :0-19999mAH
Accuracy: ± 1%
Test content: Capacity power Current Voltage
Sampling resistance :50mΩ
Last edited by patriciopat; 03-30-2015, 03:25 PM. -
Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: That opinais of this device?
i'v seen those soo cheap i was thinking of getting one just for the oled display!Comment
-
Re: That opinais of this device?
I have one, from eBay and it was worth the $6.00 I paid.
It works good- to tell if you are charging at 0.5A, 1A, 2.1A etc.
Apple/Samsung products do not always charge at the high-rate (2.1A) unless the USB bias resistors are right.
The coulomb meter tells you how much charge the battery took (mAh) but it crashes when it rolls over past 9999mAh, lol.
The resolution is 8-bits.Comment
Comment