Re: Gateway black screen
OK, Please look at post 14, since the the power supply will run the minute you plug it into the outlet, you can power up the board by itself without having any board attached to it, check and see if you do have 12~18V at the test point as shown in post 14 using the ground point as shown. Just be careful not to touch anything in the primary side such as the traces or the heat sink.
OK, Please look at post 14, since the the power supply will run the minute you plug it into the outlet, you can power up the board by itself without having any board attached to it, check and see if you do have 12~18V at the test point as shown in post 14 using the ground point as shown. Just be careful not to touch anything in the primary side such as the traces or the heat sink.
Comment