acer al1916w going bad

[1supertech]

Re: acer al1916w going bad

No shame - we have all been there. - May have to hold your hand up to more.
I attach a pic marked with some dodgy bits - may be ok- just for you to check.
Recommend looking over it all with a magnifying glass.

Couldnt tell for certain which were the secondary windings on the transformers - I see the 4 posts have been marked. You will need to number
the posts 1 to9 or whatever then with meter on ohms2000 check pin 1>2
1>3 1>4 ........2>3 3>4...... etc etc and compare the two transformers.
Primary is usually 3-6 ohms will read 0.00 in tet and secondaries 400-1500ohms.

Will check dodgy bits thanks Celldoor learned alot on this round.

[selldoor]

Re: acer al1916w going bad

That what we like to hear - well done! Long may it function.