Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

Need toshiba L755 bios file

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Need toshiba L755 bios file

    Hello again. does anybody here have bios file for this laptop. Toshiba L755-S5246. Processor is Intel Pentium B940 2.0ghz. Board code is DA0BLBMB6F0. I want to try bios first. Laptop cannot power on but charging light is lit. Already change nec tokin 2 times but still the same. voltage is present on power button. 5v/3v is also present. No heating components found. And also no short tested. Bios file from website larger than normal. Thanks!

    #2
    Re: Need toshiba L755 bios file

    i know it sounds stupid but bare with me

    on the power button socket you got 3v or after the socket----> foil -------> power button you got 3v?

    my friend i got a P755 for nothing because it was the power button problem (foil bad)
    Just cook it! It's already broken.

    Comment


      #3
      Re: Need toshiba L755 bios file

      I've got 3v on both socket and power button. I forgot to mention that when I press power button power led turns on for about 5 seconds then turns off immediately. thanks man

      Comment


        #4
        Re: Need toshiba L755 bios file

        someone got schematic or bios file for this one?

        Comment


          #5
          Re: Need toshiba L755 bios file

          The way you describe your problem it doesn't sound like a bios problem.
          Try this, and check your pch power lines again.
          Attached Files

          Comment


            #6
            Re: Need toshiba L755 bios file

            yup not a bios problem. I just reprogrammed it using known working ones from a tech friend, but still same results. I'll do what you suggested and maybe I found faulty components again. have a nice day. thanks

            Comment


              #7
              Re: Need toshiba L755 bios file

              I got a question. I've got a reading on PL10 +5vpcu = 6.18v and on PL8 +3vpcu =4.08v Are these voltage normal?

              Comment

              Working...
              X