Badcaps.net Forum
Go Back   Badcaps Forums > Motherboards with Bad Capacitors > Major Manufacturers Boards
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 08-26-2016, 01:25 PM   #21
goontron
5000!
 
goontron's Avatar
 
Join Date: Dec 2011
City & State: Cheyenne, WY
My Country: US
Line Voltage: 4k
I'm a: Professional Tech
Posts: 3,066
Default Re: Dead Motherboard after storm

Make sure none of the pads are bridging and light it up!
__________________
Stallman was right.....

Ham Radio guys are the pioneers of the "Make it work" solution.

SON-OF-*+%!% TOOL: Any handy tool that you grab and throw while yelling 'SON-OF-A-*+%!%' at the top of your lungs. It is also, most often, the next tool that you will need.

If the flux you have slathered on your workpiece is creating more heat burning away than the torch you are using, then you are soldering correctly.

With how plentiful and cheap storage has become its perplexing as to why we continue to use lossy audio codecs like MPEG....

3:22:40 pm MDT | Friday, February 9, 2029
goontron is offline   Reply With Quote
Old 04-18-2017, 03:10 PM   #22
Seagorman
Member
 
Join Date: Apr 2017
City & State: Kildare
My Country: Ireland
I'm a: Knowledge Seeker
Posts: 63
Default Re: Dead Motherboard after storm

I agree that the Ethernet Connector is the most likely culprit, well worth also changing PSU out temporarily though, I have seen PSU's check OK with Multimeter or PSU Tester before but failed in circuit when load was applied.
Seagorman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2017
Powered by vBulletin ®
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 12:58 AM.

Did you find this forum helpful?