Announcement

Collapse
No announcement yet.

Dell 1703 FPS Board # 79044120 Dead no life #2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dell 1703 FPS Board # 79044120 Dead no life #2

    This the same board as the other post how ever this one has more problem with it
    Attached Files
    Last edited by sam_sam_sam; 09-11-2011, 11:01 AM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    #2
    Re: Dell 1703 FPS Board # 79044120 Dead no life #2

    Need to what is the real value R858


    One R858 is open which is next to U850

    Also every thing work but only if you have two power supplies one 12 volt and one that 4.5 volts then you see it work
    Last edited by sam_sam_sam; 09-11-2011, 11:02 AM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    Comment


      #3
      Re: Dell 1703 FPS Board # 79044120 Dead no life #2

      Originally posted by sam_sam_sam View Post
      Need to what is the real value R858


      One R858 is open which is next to U850

      Also every thing work but only if you have two power supplies one 12 volt and one that 4.5 volts then you see it work
      What are the color bands on the resistor?

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

      Comment


        #4
        Re: Dell 1703 FPS Board # 79044120 Dead no life #2

        This a SOP chip and I can not read the numbers

        I made a mistake in model # it is not E1703 it is a E1706

        How ever I have both models
        9 PC LCD Monitor
        6 LCD Flat Screen TV
        30 Desk Top Switching Power Supply
        10 Battery Charger Switching Power Supply for Power Tool
        6 18v Lithium Battery Power Boards for Tool Battery Packs
        1 XBox 360 Switching Power Supply and M Board
        25 Servo Drives 220/460 3 Phase
        6 De-soldering Station Switching Power Supply 1 Power Supply
        1 Dell Mother Board
        15 Computer Power Supply
        1 HP Printer Supply & Control Board * lighting finished it *


        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
        2 Hem Saw Computer Stack Board

        All of these had CAPs POOF
        All of the mosfet that are taken out by bad caps

        Comment


          #5
          Re: Dell 1703 FPS Board # 79044120 Dead no life #2

          The only way that I will know for sure what the value of this resister is IF i can get one of these board to work ONE note I do not have any CLF tube that good for these two monitor at this time I do have two other screen that do have good CLF tubes

          Like said in the other post I know this board has more problem I may just use this one for parts IF I do this I will cut the inverter board part off the main part of the board and use it to test CLF tube
          9 PC LCD Monitor
          6 LCD Flat Screen TV
          30 Desk Top Switching Power Supply
          10 Battery Charger Switching Power Supply for Power Tool
          6 18v Lithium Battery Power Boards for Tool Battery Packs
          1 XBox 360 Switching Power Supply and M Board
          25 Servo Drives 220/460 3 Phase
          6 De-soldering Station Switching Power Supply 1 Power Supply
          1 Dell Mother Board
          15 Computer Power Supply
          1 HP Printer Supply & Control Board * lighting finished it *


          These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

          1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
          2 Hem Saw Computer Stack Board

          All of these had CAPs POOF
          All of the mosfet that are taken out by bad caps

          Comment


            #6
            Re: Dell 1703 FPS Board # 79044120 Dead no life #2

            I WILL use this one for parts IF I do this I will cut the inverter board part off the main part of the board and use it to test CLF tube

            It' getting cut apart SOON
            9 PC LCD Monitor
            6 LCD Flat Screen TV
            30 Desk Top Switching Power Supply
            10 Battery Charger Switching Power Supply for Power Tool
            6 18v Lithium Battery Power Boards for Tool Battery Packs
            1 XBox 360 Switching Power Supply and M Board
            25 Servo Drives 220/460 3 Phase
            6 De-soldering Station Switching Power Supply 1 Power Supply
            1 Dell Mother Board
            15 Computer Power Supply
            1 HP Printer Supply & Control Board * lighting finished it *


            These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

            1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
            2 Hem Saw Computer Stack Board

            All of these had CAPs POOF
            All of the mosfet that are taken out by bad caps

            Comment

            Working...
            X