Announcement

Collapse
No announcement yet.

Samsung 943N

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung 943N

    Hi,

    can someone help me with the inverter transformer for this model? I can't find it to buy, or equivalent to TM-1017.

    Thanks.

    #2
    Re: Samsung 943N

    Hi - is this a sole transformer or dual transformer set.
    If dual you need to measure the primary and secondary winding resistances
    in order to look for an alternative.
    If a single type is one of the secondary windings ok - if so you need to measure that.
    It would also be useful if you were to post at least your country and mains voltage.
    You could also post in the wanted classified forum.
    Please upload pictures using attachment function when ask for help on the repair
    http://www.badcaps.net/forum/showthread.php?t=39740

    Comment


      #3
      Re: Samsung 943N

      have a look in these photos.
      https://www.badcaps.net/forum/showth...t=Samsung+943N

      Comment


        #4
        Re: Samsung 943N

        I'm from Romania, voltage 230. On S1 = 932ohm, S2 -> 1Mohm. I can't tell if both S are down, but i think there are, because the spec says that S1/2 = 983ohm.

        Comment


          #5
          Re: Samsung 943N

          Originally posted by pamr4 View Post
          I'm from Romania, voltage 230. On S1 = 932ohm, S2 -> 1Mohm. I can't tell if both S are down, but i think there are, because the spec says that S1/2 = 983ohm.
          Unless you made a mistake in measuring or typing, S2 is bad because it is 1,000,000 ohm (1M). If you meant 1K or 1,000 ohms, then one of the transformers is bad because both are outside 3% of each other.

          Replacements are available on ebay like this one

          http://www.ebay.com/itm/160784404587
          --- begin sig file ---

          If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

          We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

          Please do not post inline and offsite as they slow down the loading of pages.

          --- end sig file ---

          Comment

          Working...
          X