Heres a little customization i did on a new (er) p4 i got for 55$

[Phaihn]

Heres some pics tell me waht you think.

[dood]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

I'm trying to figure out what, exactly, you have going on there.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

i created my own custom sata power connector.

[Th3_uN1Qu3]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

Add the 3.3v line for extra credit.

[Scenic]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

all that work.. and if you look at the last pic on the left.. wtf! lol

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

Add the 3.3v line for extra credit.

i will when i get a 3.3 volt resister to reduce the 5 volt to 3.3 v

[weirdlookinguy]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

It looks like shit. Also looks like you have some fun times waiting up ahead for you if you ever change hard drives (the new one might have the connector in a different position). All of this work on an old Pentium 4 that is pretty much worthless these days.

You are the ricer of computers.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

all that work.. and if you look at the last pic on the left.. wtf! lol

i know lol i didnt have any electrical tape or shrink tubing. and my soldering iron wasnt working so great so thats the best i could do for the time being.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

It looks like shit. Also looks like you have some fun times waiting up ahead for you if you ever change hard drives (the new one might have the connector in a different position). All of this work on an old Pentium 4 that is pretty much worthless these days.

You are the ricer of computers.

i made that out of stuff from the psu that came with this computer it was dead anyway so i was just repurposing the parts from it.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

also the board is duel core ready so i could put a duel core in it if i wanted.

[weirdlookinguy]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

Sorry for the harsh words dude, but I just really do not see the point of this.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

Sorry for the harsh words dude, but I just really do not see the point of this.

i just made this couse the power connectors on my supply would of bean too big for the case to close the door properly wanted to use the low profile connectors the old one had so i made this.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

i just did it couse my old connectors get pinched abit was trying to have it so its not so tight in the case.

[Th3_uN1Qu3]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

i will when i get a 3.3 volt resister to reduce the 5 volt to 3.3 v

A resistor ain't gonna work plus you already have the 3.3v rail in your ATX connector.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

A resistor ain't gonna work plus you already have the 3.3v rail in your ATX connector.

huh?

[Scenic]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

orange wires = 3.3V

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

orange wires = 3.3V

i know but i dont have one on my connector.

[370forlife]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

Unsolder some orange 3.3v wire from a different power supply, and solder it in this one's 3.3v then run it down there.

[Phaihn]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

Unsolder some orange 3.3v wire from a different power supply, and solder it in this one's 3.3v then run it down there.

ok well i allready took apart the old psu this case came with and unsoldered everything i could before my soldering iron bit the dust.

[Uranium-235]

Re: Heres a little customization i did on a new (er) p4 i got for 55$

better yet, you could get a molex to dual sata adapter for $4, even cheaper on the internet