Just for the record...
Board has 8 lytics.
- All are Teapo SC series, 220uF, 16v, 6x11 mm, with 2.5mm lead spacing.
- On this card cap date code is: Sept 2004.
One of 8 is bloated big time. - Others visually okay.
Teapo's data table does not show a 220uF/16v in a 6mm can.
(Only shows one in 8mm diameter.)
Looking at the other caps in the SC table the Ripple for this 6mm is probably ~300 and ESR ~.220.
Chemicon LXZ [ELXZ160ELL221MF15D] fits by diameter and lead spacing.
It's Ripple/ESR are 400/.180 -> so better than the SC.
.
Board has 8 lytics.
- All are Teapo SC series, 220uF, 16v, 6x11 mm, with 2.5mm lead spacing.
- On this card cap date code is: Sept 2004.
One of 8 is bloated big time. - Others visually okay.
Teapo's data table does not show a 220uF/16v in a 6mm can.
(Only shows one in 8mm diameter.)
Looking at the other caps in the SC table the Ripple for this 6mm is probably ~300 and ESR ~.220.
Chemicon LXZ [ELXZ160ELL221MF15D] fits by diameter and lead spacing.
It's Ripple/ESR are 400/.180 -> so better than the SC.
.