Some time ago, I bought an 8-port Starnet SH-9008P Fast Ethernet Switch.
Upon opening, two bulging (one leaking) 1000uF 10V S.I. electrolytics were found.
Replacing these units restored the +3.3V output on the DC-DC converter and was well within tolerance.
Testing with two network devices connected revealed no problems .
Upon opening, two bulging (one leaking) 1000uF 10V S.I. electrolytics were found.
Replacing these units restored the +3.3V output on the DC-DC converter and was well within tolerance.
Testing with two network devices connected revealed no problems .
Comment