hi everyone can someone tell me which board has the problem . i think it may be the t-con .i would like some help please. thanks
Attached Files
-
-
Re: lg 32lv3550
That is a good one.
Did you try re-seating the cables? Try having just one cable between the T-con and the LCD panel connected one at time?
Good Visual inspections of the boards?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: lg 32lv3550
i tried re-seating and with one cable switching them and this is what it looks likeAttached FilesComment
-
-
Re: lg 32lv3550
Plug that one back in and remove the other see if the pattern changes.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: lg 32lv3550
it changes thats what i did i switch them the 1st is with the lines and one ribben is out the 2nd i switch them and it looks white any Idia .thanksComment
-
Re: lg 32lv3550
Faulty Lcd panel, possible that you have a water damaged screen. Most likely not fixable.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
Comment