Anyone know what the values are for C65 and R88 on the HOAU462001
power supply board.
Do you not have the old ones? - No writing on them? no colour bands
what does the resistor measure?
A good picture of where they are on the board might help with ID.
IS THIS THREAD NOW DEAD?
OP has posted this in another thread https://www.badcaps.net/forum/showthread.php?t=7523
but doesnt actually say if his had the components and they have blown up or if it never had them in the first place!!
Default Re: Sceptre X9 Naga V Monitors
It appears as though most of the posts for this board (HOAU462001 power supply for the Sceptre X9G Naga V) indicate C65 and C88 are missing. Here's my thought. Maybe they were part (the traces dont indicate it) of the original circuit design and later omitted (snipped out) by the mfr. Just my opinion. My board has the infamous bulging caps mentioned in other posts. The 5 volt supply is running (high ripple) but the HV supply is dead. A note.
There is about 165v both sides of the missing R65 with respect to the Q3 heat sink. Nice forum. Thanks to all
Comment