![]() |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Member
Join Date: May 2012
City & State: Bijelo Polje
My Country: Montenegro
I'm a: Knowledge Seeker
Posts: 51
|
Hello,
I have this lap top and common signs "charger plugged in, but not charging" It could not start with battery and without charger. I measured voltages on bat, connector and there are few of them with around 3v. Is it normal and what do you think, is it charging chip or battery failed? |
|
|
|
|
|
#2 |
|
Member
Join Date: May 2012
City & State: Bijelo Polje
My Country: Montenegro
I'm a: Knowledge Seeker
Posts: 51
|
someone must had this or similar problem???
|
|
|
|
|
|
#3 |
|
New Member
Join Date: May 2012
City & State: quezon city
My Country: philippines
I'm a: Knowledge Seeker
Posts: 11
|
try to use other adapter...i think the central pin of ur adapter is failed...
|
|
|
|
|
|
#4 |
|
The Adventurist
Join Date: Oct 2011
City & State: Bassien
My Country: India
Line Voltage: 220VAC 60Hz
I'm a: Knowledge Seeker
Posts: 80
|
I have an HP eny15 which has a similar problem. The battery doesnt get charged and neither does the laptop run on charger. What could be the issue? I heavily speculate the charging IC or Power IC chip. Will open it up today for a closer check and then update.
|
|
|
|
|
|
#5 |
|
Member
Join Date: May 2012
City & State: Bijelo Polje
My Country: Montenegro
I'm a: Knowledge Seeker
Posts: 51
|
It is not adapter because it works on it, it doesn't work when I remove it. It is or battery or charger chip
|
|
|
|
|
|
#6 |
|
The Adventurist
Join Date: Oct 2011
City & State: Bassien
My Country: India
Line Voltage: 220VAC 60Hz
I'm a: Knowledge Seeker
Posts: 80
|
Ok guys, talking about my hp envy 15 laptop. There was a problem with the power ic -RT8206B. I reseated it with new bga solder, then re-flowed the ATI gpu and wallah! The laptop booted and worked perfectly. Details about the IC.
http://tw.richtek.com/product_detail.jsp?s=497 |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|