Samsung 245bw

[eauboy]

My monitor is dead and I am trying to take the cover off. What a challenge! Can anyone help me on this issue.
Thanks

[Toasty]

Re: Samsung 245bw

The front bezel and back cover are held together with little clips and they snap together. No screws.

Working at the gap between the two, in a bit from a corner or sometimes towards the middle of the bottom, try to pry the two apart carefully. You can use a thin, wide, flat blade screwdriver or dull knife. Some folks have success with an old credit card. Once you get a couple clips to release, just continue to the next one, gently prying as you go until the gap widens enough. A little pulling at that point usually causes them to come apart rather easily.

[ratdude747]

Re: Samsung 245bw

requesting the thread be moved to the computer monitor sub-forum.

[Toasty]

Re: Samsung 245bw

Use the red triangle RD to report. Much quicker.

[ratdude747]

Re: Samsung 245bw

Use the red triangle RD to report. Much quicker.

I thought that was for spam and other emergency stuff... not minor things.

[Toasty]

Re: Samsung 245bw

Notice that it has not had any effect by posting the request.
It remains in the wrong place - Network Design & Troubleshooting

[eauboy]

Re: Samsung 245bw

Thanks for your help Toasty - worked like a charm. Seems like a strange way to connect the two parts but probably the most cost effective.