Benq FP 767-12 goes off after approx 30min

dvorav · 01-09-2009, 01:27 AM

Greetings,

I have recently got BenQ FP 767-12 panel.

It has strange fault. If I connect it to the DVI intervace via VGA reduction. It is qite fine, no turning off even after a lot of hours. But if connect it to the analogue VGA inerface, it periodically turns off itself (no picture but power button shining). Then after while beeing off, it is possible to turn in on again for a while.

It seems to be some kind of signal problem. I'd like to know some proffesional opinions.

Thanks

01-09-2009, 01:27 AM	#1
dvorav Member Join Date: Oct 2008 City & State: Czech Republic, Europe Posts: 35	Benq FP 767-12 goes off after approx 30min Greetings, I have recently got BenQ FP 767-12 panel. It has strange fault. If I connect it to the DVI intervace via VGA reduction. It is qite fine, no turning off even after a lot of hours. But if connect it to the analogue VGA inerface, it periodically turns off itself (no picture but power button shining). Then after while beeing off, it is possible to turn in on again for a while. It seems to be some kind of signal problem. I'd like to know some proffesional opinions. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode