Hello all, I need this schematic, I only found one that does not match what I need, which is a bit different. I'm looking for the D revision. Thank you.
-
-
Re: Schematic for DA0NE7MB6D0 Rev
try thisIm Back... sort of...
-
Re: Schematic for DA0NE7MB6D0 Rev
Thank you, but that's Rev: 3AComment
-
Re: Schematic for DA0NE7MB6D0 Rev
i need this one too. hard to find rev.DComment
-
Re: Schematic for DA0NE7MB6D0 Rev
https://www.badcaps.net/forum/showpo...20&postcount=2
its in the above linkComment
-
Re: Schematic for DA0NE7MB6D0 Rev
Schematic for DA0NE7MB6D0 Rev
Comment
-
DELL G5 5590 Vulcan15 N18E (Coffee Lake-H) Revision 1.0 Schematic & Board View...10-03-2024, 09:35 AM
-
Lenovo E130 Quanta LI2 REV D,E,F Schematic & Board View...10-02-2024, 02:10 PM
-
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hey All,
Just wanted to see if anyone has the above correct schematic and BV for this model. It seems like there are different variations with the exact same board label and revision as I've found BVRs labeled " DA0Y0DMBAF0 Rev F" which is the board label on the board I have here, but it does not match the board. The board I have has a large MLCC on it (where PR96 is) and when I continuity check it to the lines matching the BVR it does not go to where the BVR says it does, and the BVR lists it as PR96 when it is clearly a MLCC. I thought the revisions maybe mixed up in the...
Comment