Model type:
VIERA TC-P55GT30
One day my 55-inch plasma Viera HDTV just died. Tried to turn it back on and got the "seven red blinking lights of death."
So today I pulled off the back and took pictures. I know I have a *very* shaky camera hand due to repetitive-strain problems, but I did the best I could by bracing the camera and took as many pics as I could of all the relevant hardware.
Does anything stand out as obviously busted?
1: http://i.imgur.com/AjFM8.jpg
2: http://i.imgur.com/ytila.jpg
3: http://i.imgur.com/N4yjU.jpg
4: http://i.imgur.com/7hT0k.jpg
5: http://i.imgur.com/1drct.jpg
6: http://i.imgur.com/bPBVl.jpg
7: http://i.imgur.com/E5Xys.jpg
8: http://i.imgur.com/Peh76.jpg
9: http://i.imgur.com/u3ADK.jpg
10: http://i.imgur.com/bCCwf.jpg
11: http://i.imgur.com/P8AcG.jpg
12: http://i.imgur.com/T5exS.jpg
13: http://i.imgur.com/ZSx71.jpg
14: http://i.imgur.com/KRyWy.jpg
15: http://i.imgur.com/CDLz6.jpg
EDIT: I also found but unfortunately this did not seem to have info relevant to this issue (or a diagram of the hardware)
EDIT: Found service manual
VIERA TC-P55GT30
One day my 55-inch plasma Viera HDTV just died. Tried to turn it back on and got the "seven red blinking lights of death."
So today I pulled off the back and took pictures. I know I have a *very* shaky camera hand due to repetitive-strain problems, but I did the best I could by bracing the camera and took as many pics as I could of all the relevant hardware.
Does anything stand out as obviously busted?
1: http://i.imgur.com/AjFM8.jpg
2: http://i.imgur.com/ytila.jpg
3: http://i.imgur.com/N4yjU.jpg
4: http://i.imgur.com/7hT0k.jpg
5: http://i.imgur.com/1drct.jpg
6: http://i.imgur.com/bPBVl.jpg
7: http://i.imgur.com/E5Xys.jpg
8: http://i.imgur.com/Peh76.jpg
9: http://i.imgur.com/u3ADK.jpg
10: http://i.imgur.com/bCCwf.jpg
11: http://i.imgur.com/P8AcG.jpg
12: http://i.imgur.com/T5exS.jpg
13: http://i.imgur.com/ZSx71.jpg
14: http://i.imgur.com/KRyWy.jpg
15: http://i.imgur.com/CDLz6.jpg
EDIT: I also found but unfortunately this did not seem to have info relevant to this issue (or a diagram of the hardware)
EDIT: Found service manual
Comment