Go Back   Badcaps Forums > Members List
Register FAQ Members List Social Groups Calendar Search Today's Posts Mark Forums Read

budm budm is offline

Badcaps Veteran

Visitor Messages

Showing Visitor Messages 1 to 10 of 31
  1. funtastic
    02-20-2015 08:29 PM
    Hey mate,

    Any chance you could get back to helping me again please?
  2. coldfuse
    02-15-2015 09:58 PM

    I could use your expertise and exposure, as I see you have assisted previous threads pertaining to this matter. I would greatly appreciate it. Thanks, -J
  3. maiden790
    02-03-2015 04:34 PM
    Hey Bud, I dont normally ask a direct question but i was hoping you could take a look at my post and maybe try and give me a clue as to what my problem may be.
    Thank you
  4. kevinm34232
    10-01-2014 07:02 PM
    Hi Bud regarding this post

    Can you clarify for me, is connecting one end of a resistor to the 5VSTBY and the other end open what you mean?
  5. bwilliams60
    09-27-2014 05:51 PM
    Hi Bud,
    I was wondering if you could have a look at my post (if you have time)with regards to the 55" Toshiba and maybe steer me in the right direction. You seem to be one of the more knowledgeable people on here and I value your opinion. Thank you in advance.

  6. shelby5041
    08-23-2014 01:53 PM
    sony kdl-40ex400

    hi i have been tinkering with this tv i power 100% dead no lights on front nothing.all caps good and all fuses good
    have done some research.took tv aparti do have 3.3v standby voltage from power supply but standbylight not on.'but no other voltages...anywhere

    i then ndisconnected the cable to main board and jumpered the 3.3v standby pin to the power on pin on main board end of cable..and i get no voltages anywhere on the power supply board other than the 3.3 standby volatage and obviously 3.3 pwr on volatage

    so my question is that if i do have 3.3 standby voltage why do i not get a standbylight???....and i originally thought it was a mainboard issue since soemone said if you get standby voltages but no standby liught ...the main board is the problem and the power supply is good.....well im not sure about that in my case since i have no volatges on power supply other than 3.3 standby

    any ideas whats going on here?

    thank you
  7. JTDawg1202
    08-19-2014 09:44 PM
    Hey budm! I have a problem almost exact to one in this forum: . I realize you would probably jump right to it if i posted a new thread but didn't since 1 already existed Please give me advise at your earliest convenience.
  8. dph1134
    08-05-2014 09:44 AM
    Mr. Martin: I'm working on a NEC Multisync LCD1700M+ monitor. I'm in need of a schematic for an ACER 55.L3403.001 power board. The service manual I have for this monitor does not have a schematic which shows all the parts used on this model power board. Can you tell me which Acer models use this power board, or do you know where I can download this schematic? Your help is appreciated. Please reply. Thank you.
  9. spoksta
    07-02-2014 08:15 PM
    It won't let me add a picture :-(
  10. spoksta
    07-02-2014 08:08 PM
    Could you tell me what this is??

About Me


Total Posts
Visitor Messages
General Information
  • Last Activity: Today 08:51 PM
  • Join Date: 02-16-2010
  • Referrals: 33

All times are GMT -6. The time now is 09:20 PM. Technical Forums 2003 - 2015
Powered by vBulletin ®
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.

Did you find this forum helpful?